Control
H. Hooshmand; M. M. Fateh
Abstract
Background and Objectives: Robot manipulator with flexible-joints is very complex nonlinear system whose control is one of the most challenging issues in the control word. Therefore, the design of voltage-based controller in addition, using of order reduction methods can reduce the complexity of the ...
Read More
Background and Objectives: Robot manipulator with flexible-joints is very complex nonlinear system whose control is one of the most challenging issues in the control word. Therefore, the design of voltage-based controller in addition, using of order reduction methods can reduce the complexity of the control law in such systems. Methods: This paper proposes a voltage controller for flexible-joint robot manipulators based on singular perturbation method. The presented control approach has all three advantages of the singular perturbation method for model order reduction, the proper structure of Port-Hamiltonian systems, and voltage control strategy (VCS). In this approach, the robot manipulator model is divided into three sub-systems, slow, medium and fast sub-systems. Each of the sub-systems is controlled using separate controller. In addition, the stability of these sub-systems and ultimately the whole system are proved. Unlike other related works, in this work the tracking error system is considered from the beginning, and by singular perturbation method, a controller is designed to stabilize the tracking system. Moreover, in the suggested voltage-based controller unlike torque control strategy, the electrical model of actuators is used. Results: The main advantages of proposed approach are simple structure, using only velocity of motors, the position of the joints as a control signal and considering the electrical model of the actuators. So, practical implementation of this controller will be with much less effort, compared to the methods like feedback linearization or other controllers in related works. Moreover, using the Lyapunov-based method, the ultimate bounded stability of the closed loop system is proved. Then, some simulations are provided for tracking, regulation, robustness and response speed purposes. Conclusion: Since, the controllers for every sub-system are designed separately, also, the control signal parameters such as joints position, motors velocity, and motors current can be simply measured, therefore, the structure of designed controller is very simple and practically implementable. As the simulation results confirm, the performance of this controller is appropriate, even when external disturbances are present or the frequency of reference signal increases. At last, by comparison and analysis of the simulation results between the presented approach and a related work, the suitable tracking performance of the suggested controller is shown.
Control
H. Chenarani; M.M. Fateh
Abstract
Background and Objectives: This paper presents a robust passivity-based voltage controller (PBVC) for robot manipulators with n degree of freedom in the presence of model uncertainties and external disturbance.Methods: The controller design procedure is divided into two steps. First, a model-based controller ...
Read More
Background and Objectives: This paper presents a robust passivity-based voltage controller (PBVC) for robot manipulators with n degree of freedom in the presence of model uncertainties and external disturbance.Methods: The controller design procedure is divided into two steps. First, a model-based controller is designed based on the PBC scheme. An output feedback law is suggested to ensure the asymptotic stability of the closed-loop error dynamics. Second, a regressor-free adaptation law is obtained to estimate the variations of the model uncertainties and external disturbance. The proposed control law is provided in two different orders.Results: The suggested controller inherits both advantages of the passivitybased control (PBC) scheme and voltage control strategy (VCS). Since the proposed control approach only uses the electrical model of the actuators, the obtained control law is simple and also has an independent-joint structure. Moreover, the proposed PBVC overcomes the drawbacks of torque control strategy such as the complexity of manipulator dynamics, practical problems and ignoring the role of actuators. Moreover, computer simulations are carried out for both tracking and regulation purposes. In addition, the proposed controller is compared with a passivity-based torque controller where the simulation results show the appropriate efficiency of the proposed approach.Conclusion: The robust PBVC is proposed for EDRM in presence of external disturbance. To the best of our knowledge, it is the first time that a regressorfree adaptation law is obtained to approximate the lumped uncertainties according to the passivity-based VCS. Moreover, the electrical model of the actuators is utilized in a decentralized form to control each joint separately.
