<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ArticleSet PUBLIC "-//NLM//DTD PubMed 2.7//EN" "https://dtd.nlm.nih.gov/ncbi/pubmed/in/PubMed.dtd">
<ArticleSet>
<Article>
<Journal>
				<PublisherName>Shahid Rajaee Teacher Training University</PublisherName>
				<JournalTitle>Journal of Electrical and Computer Engineering Innovations (JECEI)</JournalTitle>
				<Issn>2322-3952</Issn>
				<Volume>2</Volume>
				<Issue>1</Issue>
				<PubDate PubStatus="epublish">
					<Year>2014</Year>
					<Month>01</Month>
					<Day>01</Day>
				</PubDate>
			</Journal>
<ArticleTitle>THD Analysis in Closed-Loop Analog PWM Class-D Amplifiers</ArticleTitle>
<VernacularTitle></VernacularTitle>
			<FirstPage>1</FirstPage>
			<LastPage>5</LastPage>
			<ELocationID EIdType="pii">36</ELocationID>
			
<ELocationID EIdType="doi">10.22061/jecei.2014.36</ELocationID>
			
			<Language>EN</Language>
<AuthorList>
<Author>
					<FirstName>P.</FirstName>
					<LastName>Amiri</LastName>
<Affiliation>Faculty of Electrical and Computer Engineering, Shahid Rajaee Teacher Training University, Tehran, Iran.</Affiliation>

</Author>
<Author>
					<FirstName>M.</FirstName>
					<LastName>Kohestani</LastName>
<Affiliation>Faculty of Electrical and Computer Engineering, Shahid Rajaee Teacher Training University, Tehran, Iran.</Affiliation>

</Author>
<Author>
					<FirstName>M.</FirstName>
					<LastName>Seifouri</LastName>
<Affiliation>Faculty of Electrical and Computer Engineering, Shahid Rajaee Teacher Training University, Tehran, Iran.</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2014</Year>
					<Month>02</Month>
					<Day>10</Day>
				</PubDate>
			</History>
		<Abstract>In this paper, we investigate the parameters affecting Total Harmonic Distortion (THD) and Power Supply Rejection Ratio (PSRR) in PWM Class D Amplifiers (CDAs) on the basis of linear models with feedback. From our mathematical analysis, we show that the THD of a PWM Class D amplifier with feedback can be improved by increasing the gain of the integrator through adding another amplifier at the output of the integrator. We also show that the THD can be further improved by means of two cascaded amplifiers with a single pole. We verify our analysis by means of PSPICE simulations. Simulation results show that the THD of the gain boosting and the two cascaded amplifiers with a single pole CDAs can be improved by as much as 1.4 times and 2 times, respectively.</Abstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Class-D ampliﬁers</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Audio ampliﬁers</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Switching ampliﬁers</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">THD</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Distortion</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Pulse width modulation</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jecei.sru.ac.ir/article_36_470360c97099dbf8f5e9b8e03c9db0e4.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>Shahid Rajaee Teacher Training University</PublisherName>
				<JournalTitle>Journal of Electrical and Computer Engineering Innovations (JECEI)</JournalTitle>
				<Issn>2322-3952</Issn>
				<Volume>2</Volume>
				<Issue>1</Issue>
				<PubDate PubStatus="epublish">
					<Year>2014</Year>
					<Month>01</Month>
					<Day>01</Day>
				</PubDate>
			</Journal>
<ArticleTitle>A-New-Closed-form-Mathematical-Approach-to-Achieve Minimum Phase Noise in Frequency Synthesizers</ArticleTitle>
<VernacularTitle></VernacularTitle>
			<FirstPage>7</FirstPage>
			<LastPage>13</LastPage>
			<ELocationID EIdType="pii">37</ELocationID>
			
<ELocationID EIdType="doi">10.22061/jecei.2014.37</ELocationID>
			
			<Language>EN</Language>
<AuthorList>
<Author>
					<FirstName>S.</FirstName>
					<LastName>SamadiGorji</LastName>
<Affiliation>Babol Nushirvani University of Technology, Department of Electrical Engineering, Babol, Iran</Affiliation>

</Author>
<Author>
					<FirstName>B.</FirstName>
					<LastName>Zakeri</LastName>
<Affiliation>Babol Nushirvani University of Technology, Department of Electrical Engineering, Babol, Iran</Affiliation>

</Author>
<Author>
					<FirstName>M.R.</FirstName>
					<LastName>Zahabi</LastName>
<Affiliation>Babol Nushirvani University of Technology, Department of Electrical Engineering, Babol, Iran</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2013</Year>
					<Month>10</Month>
					<Day>20</Day>
				</PubDate>
			</History>
		<Abstract>The aim of this paper is to minimize output phase noise for the pure signal synthesis in the frequency synthesizers. For this purpose, first, an exact mathematical model of phase locked loop (PLL) based frequency synthesizer is described and analyzed. Then, an exact closed-form formula in terms of synthesizer bandwidth and total output phase noise is extracted. Based on this formula, the phase noise diagram as a function of bandwidth is plotted. From the analysis and simulation results, it is observed that the synthesizer has a minimum phase noise at a particular bandwidth.</Abstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Frequency synthesizers</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Phase noise</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Phase-locked loop</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Phase noise reduction</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jecei.sru.ac.ir/article_37_32eb6a01e938e239234238a48f777681.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>Shahid Rajaee Teacher Training University</PublisherName>
				<JournalTitle>Journal of Electrical and Computer Engineering Innovations (JECEI)</JournalTitle>
				<Issn>2322-3952</Issn>
				<Volume>2</Volume>
				<Issue>1</Issue>
				<PubDate PubStatus="epublish">
					<Year>2014</Year>
					<Month>01</Month>
					<Day>01</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Control‌-Strategies-for-Performance-Assessment-of-an- Autonomous Wind Energy Conversion System</ArticleTitle>
<VernacularTitle></VernacularTitle>
			<FirstPage>15</FirstPage>
			<LastPage>20</LastPage>
			<ELocationID EIdType="pii">39</ELocationID>
			
<ELocationID EIdType="doi">10.22061/jecei.2014.39</ELocationID>
			
			<Language>EN</Language>
<AuthorList>
<Author>
					<FirstName>M.R.</FirstName>
					<LastName>HojatyDana</LastName>
<Affiliation>Department of Electrical Engineering, Islamic Azad University Boroujerd Branch (IAUB), Lorestan, Iran</Affiliation>

</Author>
<Author>
					<FirstName>M.R.</FirstName>
					<LastName>AlizadehPahlavani</LastName>
<Affiliation>Department of Electrical Engineering, Malek-Ashtar University of Technology (MUT), Tehran, Iran</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2013</Year>
					<Month>08</Month>
					<Day>26</Day>
				</PubDate>
			</History>
		<Abstract>Renewable energy sources like wind, sun, and hydro are considered as a reliable alternative to the traditional energy sources such as oil, natural gas, or coal. This paper describes modeling and simulations to determine a method for the power performance evaluation of autonomous wind turbine system. A speed control regulator is utilized to control the DC bus voltage. The inverter gate’s signals are generated by decoding the Hall effect signals of the motor. The three-phase output of the inverter is applied to the permanent magnet synchronous generator (PMSG) block&#039;s stator windings. This study shows that the use of resonant controllers ensures the stability of the three-phase source supplying the load which may be unbalanced and subjected to abrupt variations. It also shows that use of PI controller ensures the regulation of DC bus to a reference voltage.</Abstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Wind energy</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Distributed generation</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Voltage controller</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">PI controller</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jecei.sru.ac.ir/article_39_34829ffe45b900ce5ea667ceeb4f28dc.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>Shahid Rajaee Teacher Training University</PublisherName>
				<JournalTitle>Journal of Electrical and Computer Engineering Innovations (JECEI)</JournalTitle>
				<Issn>2322-3952</Issn>
				<Volume>2</Volume>
				<Issue>1</Issue>
				<PubDate PubStatus="epublish">
					<Year>2014</Year>
					<Month>01</Month>
					<Day>01</Day>
				</PubDate>
			</Journal>
<ArticleTitle>DALD:-Distributed-Asynchronous-Local-Decontamination Algorithm in Arbitrary Graphs</ArticleTitle>
<VernacularTitle></VernacularTitle>
			<FirstPage>21</FirstPage>
			<LastPage>27</LastPage>
			<ELocationID EIdType="pii">42</ELocationID>
			
<ELocationID EIdType="doi">10.22061/jecei.2014.42</ELocationID>
			
			<Language>EN</Language>
<AuthorList>
<Author>
					<FirstName>M.</FirstName>
					<LastName>Rahmaninia</LastName>
<Affiliation>Department of Computer Engineering, Islamic Azad University, Ghasr-E-Shirin Branch, Kermanshah, Iran.</Affiliation>

</Author>
<Author>
					<FirstName>E.</FirstName>
					<LastName>Bigdeli</LastName>
<Affiliation>Electrical Engineering and Computer Science, University of Ottawa, Ontario, Canada.</Affiliation>

</Author>
<Author>
					<FirstName>M.</FirstName>
					<LastName>Zaker</LastName>
<Affiliation>Mathematics and Computer Science Department, Institute for Advanced Studies in Basic Sciences, Zanjan, Iran.</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2014</Year>
					<Month>02</Month>
					<Day>15</Day>
				</PubDate>
			</History>
		<Abstract>Network environments always can be invaded by intruder agents. In networks where nodes are performing some computations, intruder agents might contaminate some nodes. Therefore, problem of decontaminating a network infected by intruder agents is one of the major problems in these networks. In this paper, we present a distributed asynchronous local algorithm for decontaminating a network. In most of prior algorithms, there is a coordinator agent that starts from a node and decontaminates the network. Since this procedure is handled by an agent and in centralized mode decontamination algorithm is very slow. In our algorithm, the network is decomposed to some clusters and a coordinator is advocated to each cluster. Therefore, there is more than one coordinator that each of them starts from different nodes in the network and decontaminates network, independently. In this case, network is decontaminated faster. In addition, in previous works the upper bound of the number of moves and the number of cleaner agents required to decontaminate network are given only for networks with special structures such as ring or tori while our algorithm establishes these upper bounds on networks with arbitrary structure.</Abstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Network decontamination</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Mobile agents</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Distributed algorithm</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jecei.sru.ac.ir/article_42_4188c63fcb52252c895985918b018c9c.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>Shahid Rajaee Teacher Training University</PublisherName>
				<JournalTitle>Journal of Electrical and Computer Engineering Innovations (JECEI)</JournalTitle>
				<Issn>2322-3952</Issn>
				<Volume>2</Volume>
				<Issue>1</Issue>
				<PubDate PubStatus="epublish">
					<Year>2014</Year>
					<Month>01</Month>
					<Day>01</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Optimum Design of a SRM Using FEM and PSO</ArticleTitle>
<VernacularTitle></VernacularTitle>
			<FirstPage>29</FirstPage>
			<LastPage>35</LastPage>
			<ELocationID EIdType="pii">44</ELocationID>
			
<ELocationID EIdType="doi">10.22061/jecei.2014.44</ELocationID>
			
			<Language>EN</Language>
<AuthorList>
<Author>
					<FirstName>M.</FirstName>
					<LastName>Ranjkesh</LastName>
<Affiliation>Faculty of Engineering, University of Guilan, Rasht, Iran.</Affiliation>

</Author>
<Author>
					<FirstName>E.</FirstName>
					<LastName>FallahChoolabi</LastName>
<Affiliation>Faculty of Engineering, University of Guilan, Rasht, Iran.</Affiliation>

</Author>
<Author>
					<FirstName>M.</FirstName>
					<LastName>Pourjafari</LastName>
<Affiliation>Faculty of Engineering, University of Guilan, Rasht, Iran</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2014</Year>
					<Month>02</Month>
					<Day>23</Day>
				</PubDate>
			</History>
		<Abstract>Nowadays the use of the Switched Reluctance Motors (SRMs) has been considerably increased in various home and industrial applications. Despite of many advantages of this type of motors, such as simple structure, low cost, and high reliability, the main disadvantage of them is the generation of high torque pulsation. This paper presents a novel method to optimize a typical SRM such that the torque ripple reaches its minimum value. Meanwhile, the torque average and the motor efficiency become maximum. It is shown that the pole width to the pole pitch ratio, for both stator and rotor poles, have a great impact on the torque ripple and torque average. Finite Element Method (FEM) is used to obtain the torque ripple, the torque average and the motor efficiency for a large number of ratios. A functional relationship is developed between the input and the output parameters. Normalized summation of the torque ripple minus the torque average and the efficiency is considered to be the cost function, which must be minimized. Then, the Particle Swarm Optimization (PSO) is used to find the optimum ratio of pole width to pole pitch, for both stator and rotor. The optimum design is verified by FEM.</Abstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Switched Reluctance Motor(SRM)</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Finite element method (FEM)</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Particle Swarm Optimization (PSO)</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jecei.sru.ac.ir/article_44_55fa008e7cfaa0eee4812ab350635f75.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>Shahid Rajaee Teacher Training University</PublisherName>
				<JournalTitle>Journal of Electrical and Computer Engineering Innovations (JECEI)</JournalTitle>
				<Issn>2322-3952</Issn>
				<Volume>2</Volume>
				<Issue>1</Issue>
				<PubDate PubStatus="epublish">
					<Year>2014</Year>
					<Month>01</Month>
					<Day>01</Day>
				</PubDate>
			</Journal>
<ArticleTitle>The Application of Multi-Layer Artificial Neural Networks in Speckle Reduction (Methodology)</ArticleTitle>
<VernacularTitle></VernacularTitle>
			<FirstPage>37</FirstPage>
			<LastPage>42</LastPage>
			<ELocationID EIdType="pii">45</ELocationID>
			
<ELocationID EIdType="doi">10.22061/jecei.2014.45</ELocationID>
			
			<Language>EN</Language>
<AuthorList>
<Author>
					<FirstName>M.R.</FirstName>
					<LastName>Pishgoo</LastName>
<Affiliation>Digital Communications Signal Processing (DCSP) Research Lab., Faculty of Electrical and Computer Engineering, Shahid Rajaee Teacher Training University (SRTTU), Tehran, Iran.</Affiliation>

</Author>
<Author>
					<FirstName>M.R.</FirstName>
					<LastName>N. Avanaki</LastName>
<Affiliation>Department of Biomedical Engineering, College of Engineering and School of Medicine, Wayne State University, Detroit, MI 48201, USA</Affiliation>

</Author>
<Author>
					<FirstName>R.</FirstName>
					<LastName>Ebrahimpour</LastName>
<Affiliation>Brain&amp; Intelligent Systems Research Lab., Department of Electrical and Computer Engineering, Shahid Rajaee Teacher Training University, Tehran, Iran</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2013</Year>
					<Month>11</Month>
					<Day>26</Day>
				</PubDate>
			</History>
		<Abstract>Optical Coherence Tomography (OCT) uses the spatial and temporal coherence properties of optical waves backscattered from a tissue sample to form an image. An inherent characteristic of coherent imaging is the presence of speckle noise. In this study we use a new ensemble framework which is a combination of several Multi-Layer Perceptron (MLP) neural networks to denoise OCT images. The noise is modeled using Rayleigh distribution with the noise parameter, sigma, estimated by the ensemble framework. The input to the framework is a set of intensity and wavelet statistical features computed from the input image, and the output is the estimated sigma value for the noise model. In this article the methodology of this technique is explained.</Abstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Optical Coherence Tomography (OCT)</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Speckle redaction</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Neural Network</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Multi-Layer Perceptron</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Mean Squared Error (MSE)</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jecei.sru.ac.ir/article_45_6f275bc4a953d787757bbf71cde87276.pdf</ArchiveCopySource>
</Article>
</ArticleSet>
