Antenna Design
A. Kiani; F. Geran; S. M. Hashemi
Abstract
Background and Objectives: In this paper, a closed-form mathematical formula has been presented using of the proposed periodic structure E-field distribution, that helps designers to calculate the width of the slots in Quasi Non-Uniform Leaky Wave Antenna (QNULWA).Methods: This method is based on two ...
Read More
Background and Objectives: In this paper, a closed-form mathematical formula has been presented using of the proposed periodic structure E-field distribution, that helps designers to calculate the width of the slots in Quasi Non-Uniform Leaky Wave Antenna (QNULWA).Methods: This method is based on two steps. In the first step, some important parameters for the proposed antenna design will be extracted using simulation. In the second step, by solving a discrete differential equation, a general relation will be obtained for these types of antennas. This method has been investigated in the case of slot LWA families. Results: A Leaky wave antenna has been synthesized in the 15.5- 18 GHz frequency range for Gaussian radiation pattern. The results of simulation and antenna design will be very close to each other in 2.5 GHz Bandwidth (15.5 - 18 GHz), which shows the accuracy of this formula. Also, By changing the frequency range 2-5 GHz, the main lobe direction of the antenna will scan the space approximately 10 degrees(from 63 to 73 degree). The antenna has an SLL value of about -25 dB and 13 dB Gain at whole band 15.5-18 GHz .Conclusion: The obtained formula helps the antenna designers to calculate the dimensions this type of antenna for any pattern distribution.
Antenna Design
M. Bod; F. Geran
Abstract
Background and Objectives: Self-supported rear-radiating feeds have been widely used as reflector antenna feeds for mini terrestrial and satellite links. While in most terrestrial and satellite links a dual-polarized antenna for send and receive applications are required, all of the reported works regarding ...
Read More
Background and Objectives: Self-supported rear-radiating feeds have been widely used as reflector antenna feeds for mini terrestrial and satellite links. While in most terrestrial and satellite links a dual-polarized antenna for send and receive applications are required, all of the reported works regarding this topic are presenting a single polarized self-supported reflector antenna. In this paper, a dual-polarized hat feed reflector antenna with a low sidelobe and low cross-polarization level is presented. Methods: The proposed antenna consists of an orthogonal mode transducer (OMT), a 60 cm ring focus reflector, and a rear radiating waveguide feed known as the hat feed. 21 parameters of hat feed structure are selected and optimized with a genetic algorithm (GA). A predefined ring focus curve is used as a reflector in the optimization procedure. Dual polarization for send and receive applications is also obtained by an OMT at the rear side of the reflector antenna.Results: A prototype of the proposed hat feed reflector antenna is fabricated and the measurement results are compared with simulation ones. The proposed antenna has return loss better than 15 dB at both polarizations in the 17.7~19.7 GHz frequency range. The 60cm reflector antenna has 40dBi gain which means that the proposed antenna has about 70% radiation efficiency. About 20dB sidelobe level and more than 40 dB cross-polarization have also been realized in the measurement patterns of the proposed antenna. Conclusion: A dual-polarized hat feed reflector antenna with excellent radiation efficiency, high sidelobe, and low cross-polarization level is proposed. The proposed antenna can be a good candidate for high-frequency terrestrial and satellite communications.
