Power Electronics
M. Moradi; R. Havangi
Abstract
Background and Objectives: Traction system and adhesion between wheel and rail are fundamental aspects in rail transportation. Depending on the vehicle's running conditions, different levels of adhesion are needed. Low adhesion between wheel and rail can be caused by leaves on the line or other ...
Read More
Background and Objectives: Traction system and adhesion between wheel and rail are fundamental aspects in rail transportation. Depending on the vehicle's running conditions, different levels of adhesion are needed. Low adhesion between wheel and rail can be caused by leaves on the line or other contaminants, such as rust or grease. Low adhesion can occur at any time of year especially in autumn, resulting in disruptions to passenger journeys. Increased wheel-rail adhesion for transit rail services results in better operating performance and system cost savings. Deceleration caused by low adhesion, will extend the braking distance, which is a safety issue. Because of many uncertain or even unknown factors, adhesion modelling is a time taking task. Furthermore, as direct measurement of adhesion force poses inherent challenges, state observers emerge as the most viable choice for employing indirect estimation techniques. Certain level of adhesion between wheel and rail leads to reliable, efficient, and economical operation.Methods: This study introduces an advantageous approach that leverages the behavior of traction motors to provide support in achieving control over wheel slip and adhesion in railway applications. The proposed method aims to enhance the utilization of existing adhesion, minimize wheel deterioration, and mitigate high creep levels. In this regard, estimation of wheel-rail adhesion force is done indirectly by concentrating on induction motor parameters as railway traction system and dynamic relationships. Meanwhile, in this study, we focus on developing and applying the sixth-order Extended Kalman Filter (EKF) to create a highly efficient sensorless re-adhesion control system for railway vehicles.Results: EKF based design is compared with Unscented Kalman Filter (UKF) based and actual conditions and implemented in Matlab to check the accuracy and performance ability for state and parameter estimation. Experimental results showed fast convergence, high precision and low error value for EKF.Conclusion: The proposed technique has the capability to identify and assess the current state of local adhesion, while also providing real-time predictions of wear. Besides, in combination with control methods, this approach can be very useful in achieving high wheel-rail adhesion performance under variable complex road conditions
Power Electronics
P. Hamedani; S. Sadr; A. Shoulaei
Abstract
Background and Objectives: The principal aim of this paper is to show an independent vector control of two five-phase Linear Induction Motors (LIMs) that are supplied from a single VSI. Methods: The LIMs are running at the same speed but with different load conditions. This concept can be especially ...
Read More
Background and Objectives: The principal aim of this paper is to show an independent vector control of two five-phase Linear Induction Motors (LIMs) that are supplied from a single VSI. Methods: The LIMs are running at the same speed but with different load conditions. This concept can be especially beneficial in long trains with distributed power. To achieve excellent control characteristics and to reduce the undesirable tension forces between the train mechanical couplers, Fuzzy Logic Controllers (FLCs) have been utilized.Results: As a result, the fault occurrence of the train control systems decreases, and the system reliability increases. The results prove the electrical independence in control of a five-phase two-LIM drive supplied with a single VSI. Furthermore, in the presence of the train mechanical couplers and connections, the application of FLC offers excellent control characteristics and reduces the undesirable tension forces. Furthermore, to obtain a more worthwhile validation of the theoretical results, an experimental set up has been constructed and results have also been presented.Conclusion: According to the results, the undesirable tension forces imposed on train couplers are reduced. Consequently, it leads to higher system efficiency, lower deterioration of the train couplers and connections, greater system reliability, and higher passenger safety and comfort.
